1. LCD display 2. Down button to adjust the channel 3. Up button to adjust the channel 4. Power button 5. Sync interface and Micro-USB charging port
1.1. LCD DIsplay
2. Synchronisation process
Connect the DCH-12U/24U charger to the power supply.
Insert mGuide Pellegrino2 receivers/transmitters in the charger. Leave one free slot in the charger for the mGuide MP2-SKC synchroniser
Start mGuide MP2-SKC by pressing and holding the power button for about 3 seconds (4).
After starting the synchroniser, select the channel synchronisation mode:
2.1. Off mode – mGuide Pellegrino2 devices will turn off automatically after synchronisation
Use the ‘-‘ and ‘+’ (2.3) buttons to select the desired channel on which the devices should work.
Press and hold the ‘-‘ and ‘+’ buttons simultaneously for about 3 seconds to confirm the selected channel (LCD display should stop flashing).
2.2. On mode – mGuide Pellegrino2 devices will turn on automatically after synchronisation.
Use the ‘-‘ and ‘+’ (2.3) buttons to select the desired channel on which the devices should work (LCD display should continue to flash).
After selecting the channel synchronisation mode, insert mGuide MP2-SKC in a free slot in the charger. The LCD displays on the devices will flash quickly (approx. 5 times). The flashing will stop, which means a correctly conducted channel synchronisation process in mGuide Pellegrino2 devices.
After 5 minutes of synchronisation, mGuide MP2-SKC will turn off automatically and start charging if it is still inserted in the charger.
mGuide MP2-SKC can be removed from the charger immediately after channel synchronisation and turned off by pressing and holding the power button for about 3 seconds (4).