mGuide WIN-2
1. What's in the box
Intercom
USB cable
Power adapter
User Guide
2. Overview
mGuide WIN-2 is a wireless portable full duplex real-time intercom system providing clear sound, added reliability, and secure communication. The intercom has a range of 1/4 mile (400 meters) in open area.
3. Making a call in 3 methods
1). Press the Channel Button, then press the Call Button.
2). Press the Call Button, then press the Channel Button.
3). Press and hold the Channel Button for 1 second.
4. Monitoring
Eg. If you want to use Unit A to monitor Unit B.
On Unit B, press the Monitor Button then press the Channel Button corresponding to Unit A.
5. Making a group broadcast
Press Group Button, then you can make a broadcast.
6. Power Button
1). To turn on the device, press and hold the button for 1 second, you will hear 1 beep.
2). To turn off the device, press and hold the button for 3 seconds, you will hear 3 beeps.
3). To exit from any mode, press simply the button.
7. Volume Button
1). You can press VOL+ or VOL- to adjust the volume.
2). To change the ringtone, press and hold the VOL+ , then you can select a ringtone that you like, you have 8 melodies to choose from.
8. Pairing
The intercom system is ready to use. If you would add extra unit(s), or you want to pair anew all your units, you can follow the steps below.
Eg. You have already 4 units in your intercom system, you want to add one more unit.
1). Choose any unit of your intercom system (Unit A).
2). Press and hold the Broadcast Button of the Unit A, you will hear 1 beep, then press the Channel Button that you would distribute to the add-on unit. When the Channel Button starts to blink, the Unit A is ready to pair.
3). Press and hold the Broadcast Button of the add-on unit (Unit B), you will hear 1 beep. When you hear two more beeps, the Unit B is successfully connected to
the system.
ATTENTION: If you distribute one channel to multiple units, it may cause system failure.
9. Troubleshooting
1）Intercom cannot power on
Are AC Adapter and USB cable connected properly?
2) Cannot talk to other intercoms.
a. Check the intercom if it is successful pair.
b. Check the receiving distance between the intercoms if it is out of range.
3) The sound of the intercom is too low.
a. Make sure the volume of the intercom has been increased enough.
b. Try to be closer to the MIC during the talk.
4) Intercom is not getting the expected transmission range
Keep the intercom away from metal objects and interference sources.
5) Static noise and howling noise can be heard from the intercom
a. Maybe the two intercoms are too close, please try to move away.
b. Some electrical equipment will also interfere with the intercom to cause the static, e.g. Microwave Oven, cell phone, or other radio devices, please try to adjust the position of the intercom.
c. If the problem has not been solved, please contact us for technical support.
10. Cautions
The following will help you maintain your wireless intercom for years to come.
*Keep stations from getting wet, as they are not waterproof.
*Keep stations in a controlled environment. Avoid extreme temperatures.
*Handle the stations with care. Do not drop, throw, or mishandle the stations.
*Keep stations clean from dust and dirt as this can damage sensitive electronics.
*Do not use chemicals or cleaning solvent. Use a damp cloth to clean the station.
*Modifying or tampering with the station’s internal components can cause it to malfunction, and will also void your warranty.
11. Technical Specifications
Power Adapter: 5V/1A
Wireless Transmission Distance: 1/4 mile (400 meters) in open area.
Wireless Transmission Frequency: 433MHz
Wireless Transmission Power: ≤ 0.5W
Work Temperature: -4°F to 140°F (-20°C to +60°C)